TUBELESS TIRE REPAIR KIT M-O

¡NEW TUBELESS TIRE REPAIR KIT TO REPAIR TUBELESS TIRES!
This tubeless tire repair kit will fix holes or cuts that anti-puncture liquids cannot seal due to the size of these holes.  A kit specially designed for holes and cuts on the walls of the tires which being thin and fine, require very small and precise tools.
 

This pocket-sized kit comes in a plastic container and contains:  a 1,5mm tool, 10 x 1,5mm tire seals, cutter and glue.

INSTRUCTIONS

INSTRUCTIONS FOR USE FOR REPAIR OF TUBELESS TIRES.

1.- Before applying the tire seal, dry any possible remains of sealant liquid from puncture area.

2.- Place the tire seal in its tool introducing it through the hole of the same. Add some adhesive to the wick to guarantee a better adhesion to the tire.

3.- Insert the tire seal in the tire through the hole of the puncture leaving at least 1cm of tire seal on the outside. Do it carefully so as not to touch the rim bed with the tool, to avoid damaging it. (It is easier to insert the tire seal if you keep some pressure in the tire, even if it is covering the puncture with a finger until the moment you insert the tire seal).

4.- Finally,  pull the tool out. The tool will come out, releasing the tire seal that will stick over the hole of the puncture. The rest of the tire seal that was left out of the tire can be cut with the cutter, but never flush with the tire, always leaving 4 or 5mm of tire seal on the outside.