BIKE CLEANER - DEGREASER
General cleaning and chain degreasing spray. This cleaner and degreaser from X-Sauce was formulated considering even the most delicate bike parts maximising its effective degreasing power but protecting more delicate rubber and anodized parts.
With a new special aroma and packaging, this pH-controlled X-Sauce cleaner and degreaser will not corrode aluminum, anodized finishes or rubber parts.
MANUFACTURED WITH THE MADE WITH THE BEST COMPOSITES AND SURFACTANTS. ALL IN ONE: CLEANER, POLISHER, DEGREASER... why have several products when you can have everything in one?
CAN BE APPLIED ON DRY OR WET SURFACES: can be used to spray the bike and then rinse, or even to apply dry directly on the frame to polish, with an anti-static effect repel dust.
FOR ALL TYPES OF SURFACES: perfect for bikes, but you can even use it on shoes!
INSTRUCTIONS FOR USE OF THE BIKE CLEANER AND DEGREASER WAX LUBRICANT:
1.- Spray directly on the surface of the bike, including components, and leave for 2-3 minutes.
2.- In areas with hardened dirt, rub with a sponge or brush depending on the area.
3.- Rinse bike thoroughly with water.
We recommend, if necessary, use pressure hoses to rinse the bike (avoid directly spraying bearings or fragile components), just as we recommend not to apply the product directly to fragile components of the bicycle, such as suspension and telescopic seatposts or componments made of anodized aluminum.
You can use the cleaner on most parts of the bicycle however, it should not be directly applied to delicate components such as suspension or telescopic seatposts.
We do not recommend for use on anodized aluminum.
Usually one or two minutes is enough. Then it should be rinsed with plenty of water. If used with pressurized water hoses, it is not recommended to use pressurized water on delicate areas or bearings.
Yes, you can use the cleaner to clean the plastic cover of helmets or shoes. They will look as good as new again!
No, no problem. Simply ensure you rinse the bike well after use.
For a correct maintenance of the bicycle, we recommend always keeping the bike clean after each ride. However sometimes due to time constraints, this is not possible, so once a week is ideal to keep it in perfect condition.